OSCAR E.D.M. COMPANY LTD.

EDM machine (S500 CMAX)

Fri, 21 Jun 2013 10:13:24 +0000

CMAX Type of EDM machine , able to control 6 axes [C axis(3R or EROWA) . Rotary table(A. B axis)], automatic tool changer is availble[4 tools. 6 tools 8tools 12 tools 16tools 20 tools]

1. Highly rigid structure.

2. Tough cast iron with quenched treatment to ensure machine bench's precision and steadiness.

3. Heat treated work bench surface featuring high hardness and wear resistance.

4. Three axes with optical scale of 0.001 mm resolution.

5. Software, hardware and mechanical limit for multiple protection and high mechanical safety.

6. Feedback servo absorption system for reduced inertia and improved servo machining steadiness. Together with high rigidity bench this machine features more stable large mold surface machining servo and more uniform machining surface.

7. High speed machining circuit capable of fast and super fine machining for workpieces of different substances including nut molds (HRA88 or above), titanium, aluminum, and steel molds.

8. Micro-computer coke detector to monitor and rapidly block abnormal arc wave during machining as well as to ensure machining safety and mold quality.

9. Machining in IPS586, 32bit, CF card, 128MB and 3D motion modes.

10. Multi-stage machining up to 999 stages.

11. Features multiple comprehensive functions including: multi-level chip removal height, time based machining completion setup, completion percentage setup, original track reverse trip, coke activated mold return, error message and log during machining for troubleshooting and maintenance.

12. Offline machining file editing function .

13. Electronic hand wheel assisted mold calibration and shift for easy and fast operation .

14. Up to 100 coordinates groups (A01~A100).

15. Up to 999 machining parameters S codes (S01~S999).

16. Auto P codes editing in accordance with substance including: copper VS. steel, graphite VS. steel, graphite VS. aluminum, graphite VS. titanium, copper VS. copper, steel VS. steel, graphite VS. tungsten steel, copper VS. tungsten steel, and copper VS. aluminum.

17. Multiple axial machining including: XY Z-, XY Z+, YZ X-, YZ X+, ZX Y-, and ZX Y+. This enables full dimension machining together with E code (and optional C and A/B axis accessory).

18. The E code features 2D, 3D, straight line shift positioning, mold calibration, compensation, tool replacement, linear spiral, equal-gap dome, cylindrical track, circle track gradient spiral circle, diagonal loop, intra- and extra-circle sphere machining, square/round taper, ZC Star reaming, multi round holes, incremental displacement, multi square holes, multi linear holes, and bottom inclination machining.

19. The E code graphical preview function displays machining path

20. Features track machining function

21. OB machining mode: XYZ/XT/XZY/XZ/YZX/YZ/matching circle/square/concentric circle/concentric square/union jack pattern/cross/hexagonal

Eroding machine (S3010-2H)

Fri, 21 Jun 2013 08:55:29 +0000

X axis servo travel : 3000mm, Y axis servo travel : 1000mm ,Z axis travel :600mm ( Option : able to update to 1000mm) , one or two spindles depend on customer ,work tank size is up to L:4100mm W:1700 H:800mm,

1. Highly rigid structure.

2. Tough cast iron with quenched treatment to ensure machine bench's precision and steadiness.

3. Heat treated work bench surface featuring high hardness and wear resistance.

4. Three axes with optical scale of 0.001 mm resolution.

5. Software, hardware and mechanical limit for multiple protection and high mechanical safety.

6. Feedback servo absorption system for reduced inertia and improved servo machining steadiness. Together with high rigidity bench this machine features more stable large mold surface machining servo and more uniform machining surface.

7. High speed machining circuit capable of fast and super fine machining for workpieces of different substances including nut molds (HRA88 or above), titanium, aluminum, and steel molds.

8. Micro-computer coke detector to monitor and rapidly block abnormal arc wave during machining as well as to ensure machining safety and mold quality.

9. Three axes motion mode machining, multi-holes machining, horizontal multi-OB modes reaming, and three axes 45°/90° reaming.

10. Nine home points setup and 100 machining coordinates setup

11. Memory for up to 100 job files. Each file may contain 5 preset machining groups for horizontal placement, reaming, and ATC auto electrode replacement (special accessories required).
12. 10-stage Z-axis and horizontal OB machining. Complete machining in one setup.

13. Auto edge finding, mold center and hole center finding, mechanical reset, auto reset, manual edge finding with electronic handwheel edge finding, auto intra- and extra-hole mold center finding.

14. Single and full stage machining, machining simulation for machining initial hole, coordinates compensation, hole replacement height, coke height, trip speed, Chinese and English screens (metric/ imperial), and chip removal positioning function.

15. New generation FUZZY and intelligence editing function. Input machining substance, machining depth, and maximum and minimum machining current and the FUZZY system comes up with machining parameters at each machining depth stage for easy operation.

Super drill (SD450L CNCW)

Thu, 20 Jun 2013 16:41:51 +0000

Super drill is able to control six axes, rotary table A. B axes is available , Automatic tools changer 16 tools or 32 tools[Option], Automatic Guides changer 10 guides[Option].

1. Chinese and English display. Japanese, Germany, and French languages are available with optional fonts.

2. Optional metric and imperial unit of measure.

3. Mechanical, working, and relative coordinates display.

4. Three manual modes of continuous, step, and protection free.

5. Mechanical homing and centering function.

6. Auto finding edge, center of two points, center of circle, and vertex of right angle and coordinates rotation and mirroring functions.

7. Genuine G/M code editing with workpiece program capacity up to 10,000 nodes.

8. DXF and linear cutting machining program file conversion function.
9. Dialog based program editing function.

10. Square and circular array special module organization program editing function.

11. Machining subroutine calling function (up to 8 layers of subroutines).
12. Multiple machining condition libraries. Each library can hold up to 100 operator machining conditions.

13. Storage for up to 100 operator machining depths.

14. Single and multi hole machining.

15. Program setup (beginning and ending line number setup).

16. Electrode auto detection for machining depth and return to preset height for machining surface when given depth is reached.

17. Auto total machining depth compensation after electrode replacement in case the electrode is used up during single- and multi-holes positioning machining.

18. Variable thickness machining.

19. Back gap and pitch error compensation function.

20. Auto electrode replacement with ATC (auto electrode replacement) assembly (requires special accompanying hardware accessory).

21. 6 axes linear interpolation and acceleration and deceleration motion (requires special accessory).

22. Auto error diagnosis function.

23. I/O points, C points, S points, A points, timer and counter status.

24. 15" LCD panel with touch control.

25. Online help.

26. Programmed simulation function.

27. Machining path display.

28. Software limit function.

OPTIONS:

4 th axis (Z2 axis)

Z2 axis for machining different height (OPT).

Drill EDM (SD400 ZNC)

Thu, 20 Jun 2013 16:34:12 +0000

able to install the rotary table (A axis) for sparking, combined with sparking, automatically to rotate the table while machining [Option]

1. High speed MOSFET driven machining circuit for fast machining and high, medium, and low voltage options. Ideal for fine hole (with reduced copper tube wastes) and special substance machining.

2. Micro-computer based control system.

3. Intelligent deep hole machining. Simply enter desired machining current and all other machining parameters are set automatically.
4. Parameter changes during machining.

5. Power failure memory can last for 10 years.

6. Auto rotate release of workpiece after machining is completed.

7. X and Y axis optical scale with resolution up to 0.005mm and Z-axis decoder.

8. Auto Z-axis reset for machining re-counting.

9. Machining depth and coordinates display switch.

10. Capable of machining super hard alloy metal in irregular, sphere, and curve shapes.

11. Machining copper tube of diameter above 0.21mm with pure water for better safety while those of diameter between 0.008 and 0.2mm are machined with EDM oil for more precise hole diameter.

OPTIONS:

4 th axis (Z2 axis)

Z2 axis for machining different height (OPT).

Die-skiner machine (S430 CMAX)

Thu, 20 Jun 2013 15:57:38 +0000

CMAX Type of EDM machine , able to control 6 axes [C axis(3R or EROWA) . Rotary table(A. B axis)], automatic tool changer is availble[4 tools. 6 tools 8tools 12 tools 16tools 20 tools]